BB404F
SPECIFICATIONS
STANDARD SP ECIFICATIONS
Scale Length .............................. 863.6mm
Body-Neck Construction ......... Bolt On
Length ........................................ 1141.0mm
Width ......................................... 318.5mm
Net Weight ................................ 3.9kg
COLOR
Body
YNS ......................................... Yellow Natural Satin
BL ............................................ Black
Neck
YNS ......................................... Yellow Natural Satin
BL ............................................ Black
BODY
Material...................................... Alder
Body Depth ............................... 41mm
FINGERBOARD
Material...................................... Rosewood
Fingerboard Width ................... 0-F 40.0mm, 12-F 56.4mm
NECK
Material...................................... Maple
Neck Thickness ........................ 1-F 21.0mm, 12-F 24.4mm
P AR TS
Hardware ................................... Chrome Plated
Nut .............................................. Urea
Bridge ........................................ Korea: Diecast (Chrome)
Strings ........................................ H4030
CONTROLS
Volume ....................................... 15A 500KΩ x 2
Tone ........................................... 05A 250KΩ x 1
P ICKUP S
Front/ Rear ................................ Single Coil
Magnet
Front/ Rear ............................. Ferrite
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes
to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
5
